Main specification:

Model	KHPS900x2000 KHPS1200x2000 KHPS1450x2000 KHPS1660x2000	KHPS900x2200 KHPS1200x2200 KHPS1450x2200 KHPS1660x2200	KHPS900x2400 KHPS1200x2400 KHPS1450x2400 KHPS1660x2400	KHPS900x2600 KHPS1200x2600 KHPS1450x2600 KHPS1660x2600	KHPS900x2800 KHPS1200x2800 KHPS1450x2800 KHPS1660x2800
Max Paperboard Feeding Width	2000 mm 2000 mm 2000 mm 2000 mm	2200 mm 2200 mm 2200 mm 2200 mm	2400 mm 2400 mm 2400 mm 2400 mm	2600 mm 2600 mm 2600 mm 2600 mm	2800 mm 2800 mm 2800 mm 2800 mm
Max Printing Width	1800 mm 1800 mm 1800 mm 1800 mm	2000 mm 2000 mm 2000 mm 2000 mm	2200 mm 2200 mm 2200 mm 2200 mm	2400 mm 2400 mm 2400 mm 2400 mm	2600 mm 2600 mm 2600 mm 2600 mm
Max Paperboard Length	900mm 1200 1450 1660
Colors	1 - 5
Thickness of Printing Plate	5-7 mm
Thickness of Paperboard	2-11 mm
Speed M/Min	0-100 M/min

Features:

◆Fulfill the processes automatically i.e. paper feeding, printing (1~4 colors), scoring, trimming, slotting, angle cutting (hole punching) or die cutting, stacking

◆Designed according to high request and reliable function, humanization operation that can setting, revision, implement, changing and memories in short time, and display data.

◆All of drive rollers are made of high quality steel, hard chrome plated the surface with grinded.

◆The drive gear adopts good quality steel after heat treatment and gear shaving process, all of main drive gear equipped with cross slide block to make sure transmission accuracy.

◆ The main drive roller adopt keyless connect, decrease the connection gap, ensure printing precision.

◆ Engineer oil automatic balance device, keep the oil level equal in each unit.

◆ Phase adopts electric digital adjusting with “automatic zero return” and “ memories” function

◆ It adopts roller type lead edge feeding or push kick type feeding system.

◆The main motor is frequency motor with VDF, work stable.

(1) feeding unit:

1. a. Machine section joint and move:

◆ In case the electric control section is joint and move, the alarm is emitting to secure operators safety.

◆ Drive roller with friction cluth in avoid to damaged machine due to incorrect operation.

◆ Pneumatic locking device.

◆ Main motor is frequency motor, save energy. Start stable, with protect device.

1. b. Roller type lead edge feeder:

◆Roller type lead edge feeder with vacuum assist system, adjust wind according to cardboard bend make sure feeding sheet smoothly

1. c. Feeding roller:

◆Single row feeding roller

◆Top roller with steel core and is covered externally with anti-abrasion rubber without damaging the corrugated shape and   ensure the feeding accuracy and to improve the chromatograph precision.

◆The lower roller is made of high quality steel material, and is processed with accurate scraping, grinding, knurling, hard chromium plating,

1. d. Baffle:

◆Left and right baffle manual regulation, front baffle gap manual regulation

1. e. Zero back device

(2). Printing unit

1. a. Printing forme roller:

◆ Good quality seamless steel pipe, it though lathed grind, through balance test, running stably.

◆With the plate hanging groove, combined with the ratchet wheel, it is used to fix the plate-rolling axle to easy forme hanging.

◆Euuipped with foot switch electric control roller forward and inverse rotate

1. b. Impression cylinder:

◆seamless steel pipe, it though lathed grind, through balance test, running stably.

◆The manual regulating quick micro gap self locker is employed between impression cylinder and the printing roller and the scale installed indicates setting directions and amount

1. c. Feeding roller:

◆Top roller is thick good quality steel pipe is wrapped with anti-abrasion rubber

◆Bottom roller is thick good quality steel pipe, surface through lathed grind, chrome plated, and through balance test.

◆The manual regulating quick micro gap self locker is employed at feeding roller the scale installed indicates setting directions and amount

1. d. Anilox roller:

◆Steel pipe, it through lathed grind, chrome plated and through balance test, running stably.

◆The mesh line number is 180-200 lines/inch, Customers can choose.

◆It adopts automatic pneumatic up-down device（ when feeding, anilox roller down automatically according to order, when stop, anilox roller lift according order）

◆Anilox roller attached Sphenoid overrunning clutch, distributing ink, clean ink convenient.

◆The manual regulating quick micro gap self locker is employed at anilox roller and the impression cylinder and the scale installed indicates setting directions and amount.

1. e. Rubber roller:

◆Steel pipe surface is covered with the anti-abrasion rubber and through balance test

◆The rubber roller is processed with special grinding to keep good inking effect.

◆The manual regulating quick micro gap self locker is employed between rubber roller and anilox roller. and the scale installed indicates setting directions and amount

1. f. Phase adjustment mechanism:

◆planetary gear mechanism.

◆The printing phase can be readjusted, electrically driven by 360 degree adjustment (running, stopping).

◆The horizontal movement of the printing roller can be adjusted manually with the adjustment range of ±14mm

1. g. Ink Circulation

◆With the pneumatic diaphragm pump, automatically recycle,it is stable in ink supply and easy in operation and maintenance.

◆Ink filter net to filtrate impurities.

◆With the enclosed ink groove.

1. h. Printing Phase Fixing Unit:

◆Air cylinder braking system.

◆When machine units separate or adjusting phase, braking system limit machine running, keep original position.

1. I. Recall and Memory:

◆With Recall Memoryfunction, after washing the printing plate, the printing roller will back to the original printing position.

(3). Slotting unit:

a. Creasing wheel:

◆The creasing wheel is made of high quality steel material and is grinded and scraped and hard chromium plated.

◆Roller surface grinded and chromium plated, through balance test.

◆The manual regulating quick micro gap self locker is employed between the upper and lower creasing wheels. and the scale installed indicates setting directions and amount .

b. Axial Adjustment Mechanism of Slotting Cutter Seat:

◆seamless steel pipe, it though lathed grind, through balance test, running stably.

◆Alloy steel material with heat treatment and grinding, teeth knive, good hardness and thoughness.

◆Alloy steel material with heat treatment and grinding, teeth knive, good hardness and thoughness.

◆Saw tooth Slotting cutter width is 7mm.

◆The axial movement of the slotting cutters and creasing wheel can be adjusted synchronously by hand.

◆The manual regulating quick micro gap self locker is employed between t the upper and lower cutters. and the scale installed indicates setting directions and amount.

c. Carton hand hole puncher:

◆Optional, cost will be charged additionally and the puncher’s and die cutter sizes, decided by customers.

(4). Die-cutting Unit:

a. Die-cutting roller(bottom roller):

◆High quality steel it through lathed grind, through balance test, running stably.

◆The right and lift transverse movement can be adjusted ±10mm manually

◆The circumferential adjustment of the cutter die roller can be carried out by the planetary gear design in randomly 360 degree.

◆It is installed with pneumatic elevation equipment to facilitate die cutting, minimize the rubber cushion cutting times and prolong its service life.

b. Rubber roller (up roller):

◆High quality steel it through lathed grind, through balance test, running stably.

◆Manual regulate die-cutting pressure

◆Taiwan “Maxdura” anvil cover, easy change, economy

◆The space adjustment between rubber roller and die roller adopt self-locking device, and with air cylinder adjust quickly in large range, reduce rubber destroy, prolong rubber use life.

◆Feeding roller spaces adjusting adopts self-locking device.

◆Speed compensation device can make the rubber roller slipping follow die roller, thereby, the rubber surface speed controlled by knife die. So that the carton shape is same as knife die.

◆Equipped with rubber repair device, the rubber can be used after be repaired.

◆Mechanical helix fluted-roll type, transverse movement 40mm.

c. Phase adjustment:

◆planetary gear mechanism.

◆The die-cutting phase can be readjusted, electrically driven by 360 degree adjustment (running, stopping).

(5)Stacking unit:

a. Board Catching Arm:

◆Manual and automatic control type for choose

◆The conveyor belt of the board catching arm: its tension can be adjusted independently without any inhibition of belt length. It is easy, flexible and rapid in adjustment.

b. Lifting and falling of the machine’s working table:

◆Driven by the strong chain with smooth lifting and falling.

◆Max stacking height 1600mm

◆The lifting driving motor of the working table is equipped with the braking facility to keep the stationary position without any sliding.

c. Board Catching Guard Plate:

◆The board catching holder plate is driven pneumatically and the stacking height of the board is controlled by photoelectrical sensor.

◆The rear guard plate’s position can be adjusted manually depending on the board length.

◆The plain grainy belt has good friction coefficient to avoid the board sliding down